期刊:
2010 International Conference on Intelligent Computation Technology and Automation,2010年2:319-322
作者机构:
School of Civil Engineering and Architecture, Central South University, Changsha 410075, China Hunan;School of Civil Engineering Hunan City University, Yiyang 413000, China
会议名称:
2010 International Conference on Intelligent Computation Technology and Automation(2010 智能计算技术与自动化国际会议 ICICTA 2010)
会议时间:
2010-05-11
会议地点:
长沙
会议论文集名称:
2010 International Conference on Intelligent Computation Technology and Automation(2010 智能计算技术与自动化国际会议 ICICTA 2010)论文集
关键词:
Finite element analysis;reinforced soil;compostite material;triaxial test;simulation
摘要:
Red-sandstone reinforced with hexagonal wire mesh is a new concept of composite reinforced soil. In order to study the mechanical properties of this composite reinforced soil, a series of laboratory triaxial compression tests on specimens reinforced with hexagonal wire mesh were carried out. 3D finite element method was introduced to simulate the triaxial tests. The macro stress-strain relation of the red-sandstone specimens reinforced with hexagonal wire mesh inclusions was reproduced and verified by 3D finite element model. The results indicate: finite element method is a ideal technique to study the mechanical characteristics of composite reinforced materials. The peak strength of red-sandstone are increased by hexagonal wire mesh reinforcements, and the peak shear strength arrives at a larger shear displacement than the plain red-sandstone specimen.
摘要:
In order to improve the biodegradability of xanthate, the biodegradation process of butyl xanthate as the sole source of carbon and energy was compared to that with an external carbon source added. The experimental results showed that the degradation rate of xanthate was significantly increased in the co-metabolism process. The biodegradation rate of butyl xanthate was 65.2% after shaking culture for 72 hours under the following conditions: constant temperature of 25°C, external glucose as growth substrate with a concentration of 0.20g/L. While using butyl xanthate as the sole source of carbon and energy, its biodegradation rate was only 43.1%, and there was a 22.1% increase of the degradation rate. So the co-metabolism may be one of the effective ways to improve the biodegradability of butyl xanthate.
摘要:
A neutralization hydrolysis route has been used to synthesize titanium oxide nanoparticles. Transmission electron microscopy(TEM) and X-ray diffraction(XRD) characteri- zation results showed the TiO2 nanoparticles were single anatase phases when calcined at 600°C-800°C for 2h. The particle diameter ranged from 15 to 30nm. The pH value was key factor for precursor composition. When pH value 2-4, the H2TiO3 precursor with low agglomeration was obtained. As-prepared anatase TiO2 nanoparticles, during photodegradation of methylic orange under UV-light irradiation(λ=254nm), exhibited excellent activity, more than 95.5% methylic orange was degraded in 1h.
作者机构:
[Xie Hui; Xue Xingjian; Ou Xinquan] Tongji Univ, Sch Transportat Engn, Shanghai, Peoples R China.;[Xue Xingjian] Hunan City Univ, Sch Civil Engn, Yiyang, Hunan, Peoples R China.
会议名称:
2010 3rd IEEE International Conference on Computer Science and Information Technology(第三届IEEE计算机科学与信息技术国际会议 ICCSIT 2010)
会议时间:
2010-07-07
会议地点:
成都
会议主办单位:
[Ou Xinquan;Xue Xingjian;Xie Hui] Tongji Univ, Sch Transportat Engn, Shanghai, Peoples R China.^[Xue Xingjian] Hunan City Univ, Sch Civil Engn, Yiyang, Hunan, Peoples R China.
会议论文集名称:
2010 3rd IEEE International Conference on Computer Science and Information Technology(第三届IEEE计算机科学与信息技术国际会议 ICCSIT 2010)论文集
关键词:
traffic organization;space syntax;shared parking;parking guidance and information system;central business district
摘要:
The idea of smart growth has been accepted by many farseeing cities around the world. Their goals are to concentrate growth in the center of a city to avoid urban sprawl. Against this background, shared parking which needs less space but provides more parking spaces is welcome in urban area. However, it has been still a challenge for traffic engineers and metropolitan governors to make parking garages and lots in large-scale area, especially in the central business distribution, shared as an integrated one. This paper tries to adopt traffic organization to solve the problem of shared parking. First, it introduces space syntax which is a paradigm of city and modifies its behavioral hypotheses for motor vehicles. Then, it improves the traffic system by making use of space syntax in traffic organization combining with parking guidance and information system (PGIS). Finally, it presents the application of this method in Yanghuyuan micro center business district (MCBD), which is located in Changsha, China.
作者机构:
Tunnel and Underground Engineering Research Center of Ministry of Education, Beijing Jiaotong Univer;School of Civil Engineering, Hunan City University, Hunan,Yiyang, 413000, China
会议名称:
2010 International Conference on Intelligent Computation Technology and Automation(2010 智能计算技术与自动化国际会议 ICICTA 2010)
会议时间:
2010-05-11
会议地点:
长沙
会议论文集名称:
2010 International Conference on Intelligent Computation Technology and Automation(2010 智能计算技术与自动化国际会议 ICICTA 2010)论文集
摘要:
Constructing metro tunnel in shallow stratum destroys surrounding stratum structure, causing corresponding deformation and settlement of stratum. So it's very important to accurately predict stratum deformation and settlement for metro tunneling. In this paper, the features of FLAC3a and built-in material constitutive model are firstly analyzed, then compared with other calculating procedures, besides it is used to predict stratum deformation and settlement caused by the Shenzhen metro tunneling. It can be seen from the numerical results of the calculation obtained from FLAC3D that stratum deformation and settlement agree well with that of in-situ measurement, and can reflect the typical characteristics and change laws of stratum deformation and settlement caused by metro tunneling, which indicates that using FLAC3D to analyze stratum deformation and settlement caused by metro tunneling is feasible.
摘要:
The purpose of this paper is to construct the option pricing model of land- use right based on the real option theory. Method of real option model was employed. The results indicate that the land- use right is interpreted as an American call option, the underlying asset is regarded as housing price, the price of land-use right includes two parts, the discounted value of land development income and development of premium (real option value). It is concluded that the land development decision-making faces growing uncertainties, which makes the discounted cash flow method more and more unsuitable for pricing of land-use right, because the traditional method neglects the uncertainty and flexibility, which underestimates the value of land-use right, and affects the psychological price of real estate developers, while in the “highest bidder” policy, underestimating price often leads to failure of the land bidding; however, the real option theory applied to the pricing of land use right can effectively determine the maximum price of land use right and overcome the deficiencies of traditional pricing methods, which can improve the offer capacity, and prevent over-bidding.
作者机构:
[Wang Gongming; Zhang Qiumei] Cent S Univ Forestry & Technol, Changsha 410002, Hunan, Peoples R China.;[Zhang Weimei] Hunan City Univ, Yiyang 413000, Peoples R China.
会议名称:
The 7th International Conference on Innovation and Management(第七届创新与管理国际会议 ICIM 2010)
会议时间:
2010-12-04
会议地点:
武汉
会议主办单位:
Wuhan Univ Technol
会议论文集名称:
The 7th International Conference on Innovation and Management(第七届创新与管理国际会议 ICIM 2010)论文集
关键词:
Green manufacturing;Ecological design of furniture;Furniture material election;Materials life cycle
摘要:
Based on the principles of green manufacturing, the ecological system of furniture design consists of the ecological furniture design analysis, implementation, evaluation, as well as supporting and maintenance. Compared to the traditional furniture material election, the material election subject to the green manufacturing presents a new philosophy. The principle of furniture material election subject to the green manufacturing involves the combination of technical principle, economical principle and environmental principle. This paper also discusses the minimization of life-cycle cost of furniture material election subject to green manufacturing.
作者机构:
Department of Computer Science Hunan City University Yiyang,China;Department of computer and information technology Henan Xinyang Normal College,Xinyang China;Department of science and technology Hunan City University Yiyang,China
会议名称:
2010 Second International Conference on Intelligent Human-Machine Systems and Cybernetics(第二届智能人机系统与控制论国际学术会议 IHMSC 2010)
会议时间:
2010-08-26
会议地点:
南京
会议论文集名称:
2010 Second International Conference on Intelligent Human-Machine Systems and Cybernetics(第二届智能人机系统与控制论国际学术会议 IHMSC 2010)论文集
关键词:
mixture of factor analyzers;local linear coordinate;semi-supervised classification;manifold learning
摘要:
Most of graph-based methods for semi-supervised learning are transductive, giving predictions for only the unlabeled data in the training set, and not for an arbitrary test point. SLC(Semi-supervised Local Linear Coordinate), which is based on LLC(Local Linear Coordinate) is present here as an inductive method. The mixture of factor analyzers is used to model the raw data set, and the label smoothness over the graph is enforced by local approximation. At last, smooth nonlinear projection is achieved by local affine transformation. Experiment shows the superiority of our proposed method in comparison to others.
作者机构:
Department of mathematics Hunan City University Yiyang, China
会议名称:
2010 International Conference on Computer and Communication Technologies in Agriculture Engineering(计算机与通信技术在农业工程国际会议 CCTAE 2010)
会议时间:
2010-06-12
会议地点:
成都
会议论文集名称:
2010 International Conference on Computer and Communication Technologies in Agriculture Engineering(计算机与通信技术在农业工程国际会议 CCTAE 2010)论文集
关键词:
Image Fusion;Contourlet Transform;Fuzzy
摘要:
In this paper, a novel image fusion method based on fuzzy contourlet transform is presented. The algorithm can fuse corresponding information in different resolutions and directions, which makes the fused image clearer and more abundant in details. Meanwhile, because of the fuzzy logic's capacity of resolving uncertain problems, it overcomes the drawbacks of traditional fusion algorithm based on contourlet transform, and integrates as much information as possible into the fused image.
作者机构:
[Wu Jianjun] Hunan City Univ, Dept Comp Sci, Yiyang 413000, Hunan, Peoples R China.;[Hu Juan] Hunan Inst Sci & Technol, Inst Comp, Yueyang 414000, Hunan, Peoples R China.
会议名称:
2010 International Conference on Power and Energy Systems(2010年电力与能量系统国际会议 ICPES 2010)
会议时间:
2010-12-25
会议地点:
上海
会议主办单位:
[Wu Jianjun] Hunan City Univ, Dept Comp Sci, Yiyang 413000, Hunan, Peoples R China.^[Hu Juan] Hunan Inst Sci & Technol, Inst Comp, Yueyang 414000, Hunan, Peoples R China.
会议论文集名称:
2010 International Conference on Power and Energy Systems(2010年电力与能量系统国际会议 ICPES 2010)论文集
关键词:
intelligent parking;CAN-bus;RS-485;RS-232
摘要:
Convenient life makes intelligent parking everywhere. This paper describes how to connect the various separate modern terminal of intelligent parking with CAN-bus network, and the competitive advantage of the system by using the CAN-bus network. From a technical point of view, this paper describes the development trend of intelligent parking in next few years.
摘要:
I2S (Inter-IC Sound Bus) is one of the general audio buses applied in various industrial or embedded systems. It only processes the audio data, while other signals like various codes and control signals are transmitted individually. This paper presents an approach how to construct an embedded audio system using the I2S bus to connect relevant supporting code chip and decode chip. This system can reduce the consumption of system resources drastically, therefore fluent WAV broadcast can be guaranteed. Moreover, the familiar media files, such as MPEG1, MPEG2, MP3, MPEG4 can be played through adding its decoder. The ARM chipset of the LPC2300 series is applied in this system, therefore, system's reliability can be improved. This method can be wiedly used in vehicle- borne, ship-borne embedded flash players and portable media players.
作者:
Qingshuang Wu;Zhongliang Fu;Nan Wang;Qiang Wang
期刊:
2010 Second IITA International Conference on Geoscience and Remote Sensing,2010年2:536-539
作者机构:
[Zhongliang Fu] School of Remote Sensing and Information Engineering, Wuhan University of China, Wuhan, China;[Nan Wang] College of Territorial Resources and Tourism, Anhui Normal University, Wuhu, China;Hunan City University, Yiyang, China;[Qingshuang Wu] School of Remote Sensing and Information Engineering, Wuhan University of China, Wuhan, China<&wdkj&>College of Territorial Resources and Tourism, Anhui Normal University, Wuhu, China;[Qiang Wang] School of Remote Sensing and Information Engineering, Wuhan University of China, Wuhan, China<&wdkj&>Hunan City University, Yiyang, China
会议名称:
IITA International Conference on Geoscience and Remote Sensing (IITA-GRS 2010)
会议时间:
2010-01-01
会议地点:
Qingdao, China
会议论文集名称:
2010 Second IITA International Conference on Geoscience and Remote Sensing. v.2
摘要:
Under the current three-dimensional GIS popular tendency, the designing and realization virtual campus system based on SketchUp and OpenGL is a new idea. In this paper, firstly we propose the framework and the technical route of virtual campus system, and then discuss the workflow of three-dimensional campus scene modeling based on SketchUP and the key technologies in the realization of the system. Finally, we develop a virtual campus system of Anhui Normal University by using the technical route and the design proposal in this paper. The experiment result indicates that the technical route and design proposal are reasonable, and the system developed can entirely meet the need of real-time scene roaming in the ordinary PC.
期刊:
Applied Mechanics and Materials,2010年29-32:566-570 ISSN:1660-9336
通讯作者:
Wan Xiaojun
作者机构:
[Wan Xiaojun] Hunan City Univ, Dept Comp Sci, Changsha, Peoples R China.;[Jin Huixia] Hunan City Univ, Dept Phys & Telecom Engn, Changsha, Peoples R China.
通讯机构:
[Wan Xiaojun] H;Hunan City Univ, Dept Comp Sci, Changsha, Peoples R China.
会议名称:
International Conference on Applied Mechanics and Mechanical Engineering
会议时间:
SEP 08-09, 2010
会议地点:
Changsha, PEOPLES R CHINA
会议主办单位:
[Wan Xiaojun] Hunan City Univ, Dept Comp Sci, Changsha, Peoples R China.^[Jin Huixia] Hunan City Univ, Dept Phys & Telecom Engn, Changsha, Peoples R China.
会议论文集名称:
Applied Mechanics and Materials
关键词:
Characteristics of Luminescent;Microstructure;Porous Silicon (PS);Sonic Vacating-Method
摘要:
The special physicochemical environment caused by sonic-vacating provides an important outlet for the preparation of highly efficient luminescent porous silicon films. Experimental results show that sonic chemical treatment is an effective technology for the improvement of the microstructure of porous silicon, and the luminescent efficiency and stability thereof. Luminescent porous silicon films, prepared by ultrasonic enhanced anode electrochemical etching, display better qualities than the samples prepared by conventional methods widely used at present. This ultrasonic chemical effect roots in sonic vacating, i.e. the generation, formation and rapid collapse of bubbles in the etching solution. In the process of the porous silicon being etched, the escape rate and caving-in of hydrogen bubbles in the pores is increased as a result of the work of the ultrasonic waves, which is helpful to the vertical etching of the pores.
作者机构:
[Zhang Chengping] Beijing Jiaotong Univ, Minist Educ, Tunnel & Underground Engn Res Ctr, Beijing 100044, Peoples R China.;[Li Limin] Hunan City Univ, Sch Civil Engn, Yiyang 413000, Hunan, Peoples R China.
会议名称:
International Conference on Civil Engineering
会议时间:
JUL 19-20, 2010
会议地点:
Baoding, PEOPLES R CHINA
会议主办单位:
[Zhang Chengping] Beijing Jiaotong Univ, Minist Educ, Tunnel & Underground Engn Res Ctr, Beijing 100044, Peoples R China.^[Li Limin] Hunan City Univ, Sch Civil Engn, Yiyang 413000, Hunan, Peoples R China.
关键词:
Tunnel construction;fault fracture zone;safety risk;geology forecast;grouting reinforced region
摘要:
On the basis of Bieyancao Tunnel project, which is one of the eight level I risk tunnels in Yichang - Wanzhou railway line, the safety risks for tunneling in fault fracture zone are analyzed. The safety risks include mutations of engineering geology and hydrogeology, surrounding rock instability, sudden water inflow, structural damage of tunnel lining, exhaustion of groud water in tunnel top. Based on that, an idea is presented that the key to safety risk control of Bieyancao Tunnel is precise geological forecast system and reliable grouting reinforced structure system. By means of advance detection, a detail forecast is made for the geological conditions of F1 fault fracture zone and its influence zone. The reasonable thickness of grouting reinforced region is determined in engineering analogy method, and water plugging reliability of grouting reinforced region is checked by theoretical calculation. The tunnel construction shows that, practical geological conditions are very close to forecast results, the water plugging results of grouting reinforced structure system is very close to theoretical calculation, and the stable grouting reinforced structure system guarantees a safe tunnel project. The safety risk control system used in Bieyancao Tunnel has a very good effect, and it can be used for reference in similar projects.