浅议家长学习对提高教育孩子能力的作用
作者:
杨妙娟
期刊:
明日风尚 ,2018年(23):228-228 ISSN:1673-8365
作者机构:
湖南城市学院机械与电气工程学院
关键词:
家长;学习;能力;文化底蕴;知识威望
摘要:
作为知识时代的父母,要给孩子一碗水,自己得有一桶水,才有丰富的知识储备,教育孩子才能得心应手。
语种:
中文
展开
基于应用型高校人才培养的《液压与气压传动》教学体系改革探索
作者:
熊志宏
期刊:
科技资讯 ,2018年16(20):203-204 ISSN:1672-3791
作者机构:
湖南城市学院机械与电气工程学院 湖南益阳 413000;[熊志宏] 湖南城市学院
关键词:
高校转型;课程改革;应用型人才
摘要:
在国家政策指导和地方高校转型发展的大趋势下,应用型本科院校要优化资源配置,积极适应社会需求,制定正确的发展目标和合理的人才培养模式,深化课程改革。因此,将理论与应用紧密结合,以课程为基本单元,优化教学内容,丰富教学方法,建立校企合作平台,探索液压与气压传动的教学体系改革,以培养社会生产真正急需的综合应用型人才。
语种:
中文
展开
Impact of road-block on peak-load of coupled traffic and energy transportation networks
作者:
Yang, Xian;Li, Yong* ;Cai, Ye;Cao, Yijia;Lee, Kwang Y.;...
期刊:
Energies ,2018年11(7) ISSN:1996-1073
通讯作者:
Li, Yong
作者机构:
[Cao, Yijia; Yang, Xian; Li, Yong] Hunan Univ, Coll Elect & Informat Engn, Changsha 410082, Hunan, Peoples R China.;[Yang, Xian] Hunan City Univ, Sch Mech & Elect Engn, Yiyang 413002, Peoples R China.;[Cai, Ye] Changsha Univ Sci Technol, Coll Elect & Informat Engn, Changsha 410114, Hunan, Peoples R China.;[Lee, Kwang Y.] Baylor Univ, Dept Elect & Comp Engn, Waco, TX 76798 USA.;[Jia, Zhijian] State Grid Yiyang Power Supply Co, State Grid, Yiyang 413000, Peoples R China.
通讯机构:
[Li, Yong] H;Hunan Univ, Coll Elect & Informat Engn, Changsha 410082, Hunan, Peoples R China.
关键词:
Coupled traffic and energy transportation networks (CTETNs);Electric vehicles (EVs);Interactions;Peak-load spot;Road-block
摘要:
With electric vehicles (EVs) pouring into infrastructure systems, coupled traffic and energy transportation networks (CTETNs) can be applied to capture the interactions between the power grids and transportation networks. However, most research has focused solely on the impacts of EV penetration on power grids or transportation networks. Therefore, a simulation model was required for the interactions between the two critical infrastructures, as one had yet to be developed. In this paper, we build a framework with four domains and propose a new method to simulate the interactions and the feedback effects among CTETNs. Considered more accurately reflecting a realistic situation, an origin-destination (OD) pair strategy, a charging strategy, and an attack strategy are modeled based on the vehicle flow and power flow. The model is able to analyze the spatial and temporal distribution characteristics of EVs, and measure the impacts on power grids and transportation networks with road-block. The IEEE 33-bus system with geographic information was used as a test system to verify the effectiveness of the model. © 2018 by the authors. Licensee MDPI, Basel, Switzerland.
语种:
英文
展开
就业危机下大学生心理问题研究分析
作者:
段虹伶;陈昶
期刊:
科教文汇(下旬刊) ,2018年(18):148-149 ISSN:1672-7894
作者机构:
湖南城市学院机械与电气工程学院 湖南·益阳 413000;湖南城市学院工程训练中心/应用与创新创业学院 湖南·益阳 413000;[陈昶; 段虹伶] 湖南城市学院
关键词:
就业;危机;大学生;心理问题
摘要:
当前我国高校毕业生规模较大,尤其高校扩招后,大学生就业和再就业问题备受社会关注,成为热点问题。大学生迈向社会是人生的一次重要抉择,不仅关系到其未来发展、家庭幸福和学校办学情况,还跟国家建设相关,是人民群众的切身利益。然而,就业问题带来的压力和挑战,使毕业生心理上有所冲突。目前毕业人数日益剧增,就业难度不断增大,就业竞争激烈,学生心理压力就更大,出现了各种与就业有关的心理问题。
语种:
中文
展开
A decoupling algorithm with first-order asymptotic integration for reliability-based design optimization
作者:
Huang, Zhiliang;Yang, Tongguang;Li, Fangyi*
期刊:
Advances in Mechanical Engineering ,2018年10(9):ARTN 1687814018793336 ISSN:1687-8132
通讯作者:
Li, Fangyi
作者机构:
[Huang, Zhiliang; Yang, Tongguang] Hunan City Univ, Sch Mech & Elect Engn, Yiyang, Peoples R China;[Huang, Zhiliang] Hunan Univ, Coll Mech & Vehicle Engn, State Key Lab Adv Design & Mfg Vehicle Body, Changsha, Hunan, Peoples R China;[Li, Fangyi] Changsha Univ Sci & Technol, Coll Automot & Mech Engn, Changsha, Hunan, Peoples R China
通讯机构:
[Li, Fangyi] C;Changsha Univ Sci & Technol, Coll Automot & Mech Engn, Changsha, Hunan, Peoples R China.
关键词:
Reliability-based design optimization;non-normal-to-normal transformation;first-order asymptotic integration;decoupling approach;laptop design
摘要:
Conventional decoupling approaches usually employ first-order reliability method to deal with probabilistic constraints in a reliability-based design optimization problem. In first-order reliability method, constraint functions are transformed into a standard normal space. Extra non-linearity introduced by the non-normal-to-normal transformation may increase the error in reliability analysis and then result in the reliability-based design optimization analysis with insufficient accuracy. In this article, a decoupling approach is proposed to provide an alternative tool for the reliability-based design optimization problems. To improve accuracy, the reliability analysis is performed by first-order asymptotic integration method without any extra non-linearity transformation. To achieve high efficiency, an approximate technique of reliability analysis is given to avoid calculating time-consuming performance function. Two numerical examples and an application of practical laptop structural design are presented to validate the effectiveness of the proposed approach.
语种:
英文
展开
Discussions on non-probabilistic convex modelling for uncertain problems
作者:
Ni, B. Y.;Jiang, C.* ;Huang, Z. L.
期刊:
Applied Mathematical Modelling ,2018年59:54-85 ISSN:0307-904X
通讯作者:
Jiang, C.
作者机构:
[Ni, B. Y.; Jiang, C.] Hunan Univ, Coll Mech & Vehicle Engn, State Key Lab Adv Design & Mfg Vehicle Body, Changsha 410082, Hunan, Peoples R China.;[Huang, Z. L.] Hunan City Univ, Sch Mech & Elect Engn, Yiyang City 413002, Peoples R China.
通讯机构:
[Jiang, C.] H;Hunan Univ, Coll Mech & Vehicle Engn, State Key Lab Adv Design & Mfg Vehicle Body, Changsha 410082, Hunan, Peoples R China.
关键词:
Uncertainty analysis;Non-probabilistic convex modelling methods;Correlation analysis;Evaluation criterion
摘要:
Non-probabilistic convex model utilizes a convex set to quantify the uncertainty domain of uncertain-but-bounded parameters, which is very effective for structural uncertainty analysis with limited or poor-quality experimental data. To overcome the complexity and diversity of the formulations of current convex models, in this paper, a unified framework for construction of the non-probabilistic convex models is proposed. By introducing the correlation analysis technique, the mathematical expression of a convex model can be conveniently formulated once the correlation matrix of the uncertain parameters is created. More importantly, from the theoretic analysis level, an evaluation criterion for convex modelling methods is proposed, which can be regarded as a test standard for validity verification of subsequent newly proposed convex modelling methods. And from the practical application level, two model assessment indexes are proposed, by which the adaptabilities of different convex models to a specific uncertain problem with given experimental samples can be estimated. Four numerical examples are investigated to demonstrate the effectiveness of the present study. © 2018 Elsevier Inc.
语种:
英文
展开
中等时间尺度下弹道明胶的线性黏弹性模型
作者:
马小林;范毓润
期刊:
高分子材料科学与工程 ,2018年34(12):95-100 ISSN:1000-7555
通讯作者:
Fan, Yurun(yurunfan@zju.edu.cn)
作者机构:
[马小林; 范毓润] State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou;310027, China;School of Mechanical and Electrical Engineering, Hunan City University, Yiyang;413002, China;[马小林] 310027, China<&wdkj&>School of Mechanical and Electrical Engineering, Hunan City University, Yiyang
通讯机构:
[Fan, Y.] S;State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou, China
关键词:
弹道明胶;老化行为;中等时间尺度;线性黏弹性;Burgers模型;蠕变与应力松弛
摘要:
在不同时间尺度下,明胶表现出不同的黏弹性行为。应用蠕变和应力松弛模式研究质量分数为10%的弹道明胶在中等时间尺度下的线性黏弹性行为。低剪切速率下的连续加载-卸载实验显示,在常规感知的时间尺度下(~1min)弹道明胶接近完全弹性体,其线性区应变范围为0~0.25。对蠕变实验对应的中等时间尺度(>1h),选择样品老化24h作为实验起点,这时明胶结构缓慢老化带来的影响可以忽略,从而能够构建恒定参数的本构方程来描述弹道明胶的线性黏弹性行为。对1组蠕变实验结果进行分析,可确定Burgers模型的4个粘弹性参数,然后使用该组参数的模型预测另外2组蠕变实验以及应力松弛实验。结果表明Burgers模型能较好地表征弹道明胶在中等时间尺度下的线性黏弹性行为。
语种:
中文
展开
Robust Clustered Support Vector Machine With Applications to Modeling of Practical Processes
作者:
Lu, Xin-Jiang* ;Hu, Te-Te;Zhang, Yi* ;Fan, Bin
期刊:
IEEE ACCESS ,2018年6:75143-75154 ISSN:2169-3536
通讯作者:
Lu, Xin-Jiang;Zhang, Yi
作者机构:
[Hu, Te-Te; Lu, Xin-Jiang; Zhang, Y; Zhang, Yi; Fan, Bin] Cent S Univ, State Key Lab High Performance Complex Mfg, Sch Mech & Elect Engn, Changsha 410083, Hunan, Peoples R China.;[Fan, Bin] Hunan City Univ, Coll Mech & Elect Engn, Yiyang 413002, Peoples R China.
通讯机构:
[Lu, XJ; Zhang, Y] C;Cent S Univ, State Key Lab High Performance Complex Mfg, Sch Mech & Elect Engn, Changsha 410083, Hunan, Peoples R China.
关键词:
cluster;noise;nonlinearly distributed data;Robust LS-SVM;robust modeling
摘要:
Real datasets are often distributed nonlinearly. Although many least squares support vector machine (LS-SVM) methods have successfully modeled this kind of data using a divide-and-conquer strategy, they are often ineffective when nonlinear data are subject to noise due to a lack of robustness within each sub-model. In this paper, a robust clustered LS-SVM is proposed to model this type of data. First, the clustering method is used to divide the sample data into several sub-datasets. A local robust LS-SVM model is then developed to capture the local dynamics of the corresponding sub-dataset and to be robust to noise. Subsequently, a global regularization is constructed to intelligently coordinate all local models. These new features ensure that the global model is smooth and continuous and has a good generalization and robustness. Through the use of both artificial and real cases, the effectiveness of the proposed robust clustered LS-SVM is demonstrated. © 2013 IEEE.
语种:
英文
展开
高性能复合材料游艇船体切边机研制
作者:
熊志宏;蒋中维;丁小兵
期刊:
科技风 ,2018年(5):158 ISSN:1671-7341
作者机构:
湖南城市学院机械与电气工程学院 湖南益阳 413000;[熊志宏; 蒋中维; 丁小兵] 湖南城市学院
关键词:
复合材料;游艇船体;切边机
摘要:
目前,大部分游艇的船体及部分配件多以玻璃钢等高性能复合材料制成。游艇船体成型脱模后,在边缘等处往往都留有毛边。人工去除毛边的方法存在生产效率低、精度不高、环境污染等问题。因此,针对这些问题,很有必要研制一款游艇船体切边机以提高游艇在去除船体毛边时的效率和加工质量,降低成本和污染,改善工作环境。
语种:
中文
展开
基于随机海浪理论的船舶摇荡运动仿真研究
作者:
殷赳;范彬
期刊:
湖南城市学院学报(自然科学版) ,2017年26(2):63-66 ISSN:1672-7304
作者机构:
湖南城市学院 机械与电气工程学院,湖南 益阳,413000;[殷赳; 范彬] 湖南城市学院
关键词:
随机海浪;船舶摇荡运动;功率谱密度;数值模拟
摘要:
为确定海运时船舶及其上所载货物所受的随机波浪载荷,以保证船舶和货物在海运中的安全性,提出将随机过程理论运用于不规则海浪的模拟过程,确定了随机海浪的数值建模方法,创造性地结合谱分析方法进行船舶运动研究,并通过数值计算方法模得出特定条件下船舶摇荡运动的功率谱密度分布.
语种:
中文
展开
电网不平衡情况下基于神经网络并网逆变器同步技术研究
作者:
阳同光
期刊:
电机与控制学报 ,2017年21(6):66-74 ISSN:1007-449X
通讯作者:
Yang, Tong-Guang
作者机构:
[阳同光] College of Mechanic and Electrical Engineering, Hunan City University, Yiyang;413000, China;[阳同光] 413000, China
通讯机构:
[Yang, T.-G.] C;College of Mechanic and Electrical Engineering, Hunan City University, Yiyang, China
关键词:
电网不平衡;并网逆变器;神经网络;同步;鲁棒性
摘要:
为解决常规锁相环技术在电网电压不平衡情况下难以对电网电压频率和相位进行有效检测的问题,提出一种电网不平衡情况下基于神经网络的并网逆变器同步算法。首先,在两相静止坐标系下推导电网电压状态方程,并基于此建立神经网络;然后,利用网络输出电压矢量和实际电压矢量误差进行在线调整权值,并利用权值调整计算在线辨识电网电压频率、相位和幅值,从而可以构建电网电压的正负序分量。仿真和实验结果表明:该方法能在电网不平衡情况下快速有效在线自适应辨识电网电压频率和相位,提取电网电压正负序分量,具有较强的鲁棒性。
语种:
中文
展开
非机械类专业《模具设计与制造》课堂教学的思考与探索
作者:
陈昶;丁小兵;殷赳;熊志宏;尹旭妮;...
期刊:
科技风 ,2017年(06):56-56 ISSN:1671-7341
作者机构:
1. 湖南城市学院机械与电气工程学院;2. 武汉工商学院信息工程学院
关键词:
模具设计与制造;培养;材料成型基础;教学改革
摘要:
在加强复合型人才培养的时代大环境下,越来越多的非机械类专业如无机非金属材料工程,高分子材料与工程等将《模具设计与制造》列入本专业的培养计划。在树立学生的学习动机,培养学生的学习兴趣以及选择正确的教学侧重三个方面对非机械类专业《模具设计与制造》课堂教学进行了相应的探索与思考,以期提高该门课程的教学质量,并将取得的成果推广到其他相似的课程之中。
语种:
中文
展开
烧结工艺对电磁压制成形Ag-Cu-Zn-Sn钎料组织与性能的影响
作者:
胡晓华;胡建华;高歌;徐畅;陈昶
期刊:
热加工工艺 ,2017年46(1):23-27,31 ISSN:1001-3814
作者机构:
[胡晓华; 胡建华; 高歌; 徐畅] 武汉理工大学材料科学与工程学院;[陈昶] 湖南城市学院机械与电气工程学院
关键词:
电磁压制;烧结工艺;银基钎料;致密度
摘要:
采用理论分析、显微分析、工艺实验的方法对电磁压制成形的中温无镉银基钎料Ag44Cu28Zn25Sn3进行了研究,探索了不同烧结温度和保温时间对钎料致密度、硬度及组织结构的影响。结果表明:烧结时间不变时,在一定的烧结温度范围内,温度越高烧结后试样越致密,硬度越高;而烧结温度不变时,烧结时间延长,则烧结后试样致密度越低,硬度也越低。该结果可为电磁压制成形银基钎料烧结工艺的合理设计提供一定的理论和工程实践指导。
语种:
中文
展开
新工科背景下《机械工程材料》课程教学的探索
作者:
陈昶;熊志宏;殷赳
期刊:
科技视界 ,2017年(21):37-38 ISSN:2095-2457
作者机构:
湖南城市学院工程训练中心 应用与创新创业学院,湖南 益阳,413000;湖南城市学院机械与电气工程学院,湖南 益阳,413000;[熊志宏; 陈昶; 殷赳] 湖南城市学院
关键词:
新工科;机械工程材料;教学;探索
摘要:
在新工科建设背景下,对机械类专业人才提出了新的要求。《机械工程材料》作为机械类专业核心课程,在人才培养体系中起着至关重要的作用。本文在调整教学内容,丰富教学手段和强化教师素质三大方面对新时期下《机械工程材料》课程教学进行了相应的探索,以期提升该门课程的教学质量,培养出满足新工科建设要求的综合性机械类专业人才。
语种:
中文
展开
A novel LS-SVM control for unknown nonlinear systems with application to complex forging process
作者:
Fan Bin;Lu Xin-jiang* ;Huang Ming-hui
期刊:
中南大学学报(英文版) ,2017年24(11):2524-2531 ISSN:2095-2899
通讯作者:
Lu Xin-jiang
作者机构:
[Lu Xin-jiang; Huang Ming-hui; Fan Bin] Cent S Univ, Sch Mech & Elect Engn, Changsha 410083, Hunan, Peoples R China.;[Fan Bin] Hunan City Univ, Coll Mech & Elect Engn, Yiyang 413002, Peoples R China.
通讯机构:
[Lu Xin-jiang] C;Cent S Univ, Sch Mech & Elect Engn, Changsha 410083, Hunan, Peoples R China.
关键词:
unknown system;inverse control;input/output approximation;LS-SVM control;linear kernel
摘要:
A novel LS-SVM control method is proposed for general unknown nonlinear systems. A linear kernel LS-SVM model is firstly developed for input/output (I/O) approximation. The LS-SVM control law is then derived directly from this developed model without any approximation and assumption. It further proves that the control error is fully equal to the LS-SVM modeling error. This means that a desirable control performance can be achieved because the LS-SVM has been proven to have an outstanding modeling ability in the previous studies. Case studies finally demonstrate the effectiveness of the proposed LS-SVM control approach.
语种:
英文
展开
基于T-S模型的液压缸模糊故障树分析方法研究
作者:
熊志宏;刘君;范彬;陈昶;殷赳
期刊:
湖南城市学院学报(自然科学版) ,2017年26(4):47-51 ISSN:1672-7304
作者机构:
湖南城市学院 机械与电气工程学院,湖南 益阳,413000;[熊志宏; 刘君; 陈昶; 殷赳; 范彬] 湖南城市学院
关键词:
模糊故障树分析;故障数据;T-S模型;故障子树
摘要:
针对液压油缸故障树分析时存在的故障数据获取不足以及传统分析方法的限制,提出了基于T-S模型的液压油缸模糊故障树分析方法,对已建立的液压油缸T-S模糊故障树进行分析.分析过程中,采取将底事件的模糊失效率替代为其故障概率的方法,同时将其故障程度用模糊数来表示﹒对液压油缸T-S模糊故障子树进行实例分析,计算并分析所建立的液压油缸模糊故障子树的各故障分析数据.
语种:
中文
展开
以培养设计创新能力为核心的工程图学课程教学改革
作者:
张闻芳
期刊:
科技风 ,2017年(17):29-29 ISSN:1671-7341
作者机构:
湖南城市学院机械与电气工程学院
关键词:
设计创新能力;工程图学;教学改革
摘要:
为了适应全球科技创新发展的趋势,本文结合工程图学教学实际,以培养学生设计能力和创新能力为核心,改革教学内容、教学方法、教学手段以及综合实践等方面进行了阐述,逐渐实现工程图学与设计创新能力培养的全面深入结合。
语种:
中文
展开
基于KPCA与RVM感应电机故障诊断研究
作者:
阳同光;桂卫华
期刊:
电机与控制学报 ,2016年20(9):89-95 ISSN:1007-449X
通讯作者:
Yang, Tong-Guang
作者机构:
[阳同光] College of Mechanical and Electrical Engineering, Hunan City University, Yiyang, 413000, China;[阳同光; 桂卫华] College of Information Science and Engineering, Central South University, Changsha, 410083, China
通讯机构:
[Yang, T.-G.] C;College of Mechanical and Electrical Engineering, Hunan City University, Yiyang, China
关键词:
核主成分分析;相关向量机;感应电机;故障诊断
摘要:
针对感应电机非线性、强耦合、时变的特点,提出一种将核主成分分析(KPCA)和相关向量机(RVM)相结合的感应电机故障诊断方法。首先,对感应电机定子电流进行小波分解,并采用核主元分析方法有效去除信息的冗余,得到能反映感应电机运行状态的特征向量。然后,利用相关向量机对故障特征向量进行故障分类,识别感应电机的运行状态。通过对不同运行状态下感应电机进行识别分析,验证了此方法的可行性和实用性,并和其他3种方法比较,结果表明基于KPCARVM方法的故障诊断方法有较好的分类效果和泛化能力,是一种有效的感应电机故障诊断方法。
语种:
中文
展开
Fe_(80)Si_(8.5)B_xP_(9.5-x)Cu_2非晶形成能力与磁性能研究
作者:
范彬;文明才;廖建勇
期刊:
热加工工艺 ,2016年45(12):62-64 ISSN:1001-3814
作者机构:
[范彬; 文明才; 廖建勇] 湖南城市学院机械与电气工程学院, 湖南, 益阳, 413000
关键词:
铁基非晶;非晶形成能力;磁性能
摘要:
铁基非晶拥有优异的软磁性能,B元素的加入对非晶合金具有重要意义。结果表明:Fe_(80)Si_(8.5)B_xP_(9.5-x)Cu_2(x= 0,1,3,6,8)中随B元素含量的增加,其非晶形成能力增加,热稳定性增加。同时也提高了Fe_(80)Si_(8.5)B_xP_(9.5-x)Cu_2非晶合金的软磁性能,当x=8时,其饱和磁化强度(M_s)达234.94 emu/g,磁矫顽力为20.7Oe。
语种:
中文
展开
神经网络反推控制在光伏系统最大功率点跟踪中的应用
作者:
阳同光;桂卫华
期刊:
太阳能学报 ,2016年37(12):3030-3036 ISSN:0254-0096
通讯作者:
Yang, Tongguang(Yangtongguang1@163.com)
作者机构:
[阳同光] College of Mechanical and Engineering, Hunan City University, Yiyang, 413000, China;[阳同光; 桂卫华] College of Information Science and Engineering, Central South University, Changsha, 410083, China
通讯机构:
College of Mechanical and Engineering, Hunan City University, Yiyang, China
关键词:
太阳电池;最大功率点跟踪;神经网络反推控制;鲁棒性
摘要:
计对太阳电池输出最大功率受到光照强度和温度等因素影响的问题,提出一种基于神经网络反推控制技术的最大功率点跟踪方法。首先利用神经网络求取最优直流母线参考电压,设计反推控制实现光伏发电系统最大功率点跟踪和单位功率因数并网。然后,利用神经网络对光伏发电系统的不确定性部分进行补偿,消除非线性模型的不确定性部分的影响。最后,利用Liyapulov稳定性理论证明了神经网络反推控制器的稳定性。实验结果表明该方法能同时实现光伏发电系统的最大功率点跟踪和单位功率因数并网,具有良好的抗干扰能力。
语种:
中文
展开