版权说明 操作指南
首页 > 成果 > 详情

Y形支撑耗能环有限元分析

认领
导出
Link by 中国知网学术期刊
反馈
分享
QQ微信 微博
成果类型:
期刊论文
作者:
邬雨生;张淼;蒋潇;胡皓
作者机构:
[邬雨生; 张淼; 蒋潇; 胡皓] 湖南城市学院土木工程学院
语种:
中文
关键词:
耗能支撑;耗能环;有限元分析;钢结构;抗震性能
关键词(英文):
energy dissipating bracing;energy dissipating ring;finite element analysis;steel structure;seismic performance
期刊:
四川建材
ISSN:
1672-4011
年:
2022
期:
02
页码:
83-84
基金类别:
湖南省大学生创新创业训练计划项目:负弯矩作用下装配式U型钢-砼组合梁试验研究(S202011527007);
机构署名:
本校为第一机构
院系归属:
土木工程学院
摘要:
在钢结构当中,可通过添加耗能支撑的做法来提高结构的抗震性能.经验表明,耗能支撑在实际工程当中的作用仍然存疑。近年来的研究发现在Y形耗能支撑端部添加钢环(耗能环)能明显改善系统的抗震性能。本文基于已有试验结果,利用有限元软件ANSYS对钢环的参与作用进行了参数分析,包括连接板长度以及钢环厚度,分析结果显示,增加连接板长度时承载力增大,且钢环中部应力增大,增加钢环厚度时,承载力及耗能明显增加,并减小应力强度。
摘要(英文):
The dissipating bracings are always used to enhance the seismic performance of steel structures,but previous earthquakes has risen doubts about using this member.Recent research show that the energy steel rings can be used to improve the seismic performance of the system.Based on the existed test results,parameter analysis is conducted with the software ANSYS,and the influence of plate length and thickness and ring thickness are analyzed,the results show that,when increasing the plate length,the load capacity grows,and the stress in the middle increases,when increasing the ring thickness,the c...

反馈

验证码:
看不清楚,换一个
确定
取消

成果认领

标题:
用户 作者 通讯作者
请选择
请选择
确定
取消

提示

该栏目需要登录且有访问权限才可以访问

如果您有访问权限,请直接 登录访问

如果您没有访问权限,请联系管理员申请开通

管理员联系邮箱:yun@hnwdkj.com